
Heavy extruded aluminum frame plus reinforced aluminum housing.
Designed to withstand tough use and abuse. New sound dampening frame-mounted
vinyl "bumpers" reduce vibration. Plus: New, quieter operating electric
solenoid valve assembly and impeller fan.

Immediate soil extraction.
Clear, see-through recovery tank slides out for easy emptying. New
antisplash hood deflector directs dirty extracted solution downward
into recovery tank.
Thicker, stiffer black bristle brush is more aggressive than our standard
white bristle brush. Extremely effective for commercial applications
where carpet is severely soiled with oily deposits and deeply imbedded
soil.

New stronger control handle!
has external wiring and redesigned positive locking, quick-connect
latching system. Lighter operating switch controls are large, easy to
read.

New! Easily adjustable detergent flow control.
Gives you up to 80% more coverage per gallon than wet systems. Operator
can precisely control detergent flow for more efficient use on varied
soil conditions.
Specially formulated high pH detergent is strong enough to remove
deep down imbedded oily soil in synthetic fibers, but gentle enough
to clean without damage. Low pH detergent has high margin of safety
for optimum performance on all natural or unknown fibers. One gallon
of each cleans up to 3,200 square feet.
|
|
| Dimensions |
Length
24" x Width 17-1/2" x Height 15-1/2" (Less handle and detergent
tank). 36" floor to top of handle. |
| Shipping
Weight |
74
pounds. |
| Net
Weight |
57
pounds with handle. 46 pounds without handle. |
| Handle |
Detachable |
| Solution
Tank Capacity |
5
gallons, hood mounted. Detachable. |
| Dirty
Solution Recovery Tank Capacity |
3
gallons. Clear, "see-through". |
| Power
Supply |
110-120
volt, 50-60 Hertz, 7.7 Amperes. 220 volt available, 50-60 Hertz, 3.8
Amperes |
| Wattage |
860
watts |
| Motor |
3/4
HP @ 10,000 RPM (full load) with permanently lubricated bearings. |
| Transmission |
Primary
Drive Train - Helical gears permanently lubricated. Secondary Drive
Train - Chain Drive. |
| Brush
Construction* |
Rigid
vinyl core, with 1-1/8" tynex bristles secured by 3 layers of epoxy
resin - impregnated heavy cord. Length 13"Diameter 4-3/4"* Stiff
bristle brush available. |
| Controls |
2 illuminated
rocker type switches mounted on the handle. (color-coded control
panel.) Red - Motor and light control. White - Controls detergent
through electric solenoid valve.
|
| Detergent
Flow Control |
Adjustable
flow output, slow to fast. |
| Defoaming
Process |
Solution
added to defoamer tank automatically mixes with recovered foam and
liquefies foam for easy disposal
|
| Color |
Von Schrader
gray hood and detergent tank. Clear recovery tank. Steel Components
- Black epoxy painted for durability
|
| Power
Supply Cord |
50
foot, non-marring, 3 wire. |
| Operating
Principle |
One
pass. Air and detergent are mixed under pressure to generate a dense,
low moisture-cleaning agent discharged ahead of the machine and cylindrical
nylon brush. The brush applies aerated detergent to loosen dirt from
base to tip of each carpet fiber. Dirt held in suspension is removed
by vacuum located immediately behind the brush. Vacuum lifts dirt,
depositing it in the recovery tank where the cleaning agent is reduced
to liquid for easy disposal. |
| Drying
Time |
From
1 hour to less than 2 hours, depending on environmental humidity and
carpet pile depth and density. |
| Warranty |
Special 1
year warranty on all parts and labor.
|
Ordering Information:
We prefer a personalized order process therefore, please telephone us toll
free (in the USA) at
1-800-826-1600 between 8:15am and 4:30pm central time for a customer service
representative.
|
|